Category Archives: windows 10 can t see mac on network

Windows 10 can t see mac on network

By | 23.05.2020

Every network device or interface, such as your laptop 's Wi-Fi adapter, has a unique hardware ID called the MAC or "media access control" address. You can find the MAC address for your network card in Windows 10 in just a couple of steps. There are a few reasons you might need to find your MAC address, also known as the physical address or hardware address.

If you're setting up your routerfor example, you could use MAC address filtering to specify the devices that are allowed to connect to the network based on their MAC addresses. However, this isn't really a solid way to secure your network, since MAC addresses can be easily changed or spoofed. Another reason is if your router lists connected devices by their MAC address and you want to figure out which device is which.

Luckily, you can find your MAC address in Windows 10 easily in Windows with either the command prompt or in the settings details of your network adapter. Open the command prompt.

Can’t See Other Computers on a Network? Fixes For Windows, Mac, and Linux

Find your adapter's physical address. Scroll down to your network adapter and look for the values next to "Physical Address," which is your MAC address. Search "View network status and tasks" in the taskbar and click on it. Laptop Mag.Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Learn More. Learn how to collaborate with Office Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services.

You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number. There might be an issue with the connection between your Windows computer and your Mac. If they are connected to a homegroup, you can try to run the troubleshooter in your Windows computer. Kindly visit the link provided here: Fix problems with HomeGroup after updating or upgrading to Windows Did this solve your problem?

Yes No. Sorry this didn't help. There's no problem in connecting. A software conflict is one of the possible causes why it does not show in the File Explorer. To troubleshoot your concern, please perform a clean boot. It help eliminate software conflicts. You may refer to this link. Note : Please go through the section: How to reset the computer to start as usual after troubleshooting with clean boot of the KB article to boot the computer in normal startup after fixing the issue.

April 7, Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Site Feedback. Tell us about your experience with our site.

This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 5. Nick Dich Replied on November 29, Microsoft Agent. Hi, There might be an issue with the connection between your Windows computer and your Mac. Let us know if this helped you resolve the issue. Thanks for marking this as the answer. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response? In reply to Nick Dich's post on November 29, I recently upgraded one of my computers to Windows 10 and setup a shared folder so that I could easily transfer files from my MacBook Pro and Windows 7 machines to Windows 10 over the home network. I did a clean install of Windows 10, created a shared folder and attempted to connect to my shared folder from OS X. Unfortunately, I was not able to connect and it took me a little time to figure it out.

Right-click on the folder, go to Properties and click on the Sharing tab. Go ahead and share the folder and set the permissions to whatever you desire in terms of access. I suggest clicking on Advanced Sharing as you have more fine-grain control over everything. Check the Share this folder box and then give the share a name.

Click on Permissions and then add groups or users that you want to give access. The next thing you need to do is make sure that File and Printer Sharing is turned on and allowed through the Windows Firewall in Windows Then click on Allow an app or feature through Windows Firewall.

Scroll down until you see File and Printer Sharing and make sure that it is checked for the Private network. You may have to first click on the Change settings button at the top before you can select a box. Lastly, you can decide how you want users to access the folder on Windows By default, when connecting from another machine, you have to enter the username and password of an account that has access to that shared folder on Windows However, if you feel your home network is super secure, you can always turn off password protected sharing, which means anyone can connect to the shared folder without having to type in a username or password.

Here you will see an option called Password protected sharingwhich you can turn off. I personally keep it turned on, but if you really hate having to type in a username and password to connect, this is an option. Also, if you use Windows 10 without a password, this would save you from having to setup a password on your account. Note that even if you have a Windows account with a password, if you turn off password protected sharing, then people can still connect without typing any credentials.

If Shared is not in the sidebar, you have to add it. With Finder open, click on Finder and then Preferences at the top. Click on Sidebar and check all the items under Shared. Now go back to Finder and wait till your computer shows up. Note that it can take a little while until the Windows 10 PC shows up. To do that, open Finder and click on Go and then Connect to Server.

You have to make sure the firewall is configured properly.During these challenging times, we guarantee we will work tirelessly to support you. We will continue to give you accurate and timely information throughout the crisis, and we will deliver on our mission — to help everyone in the world learn how to do anything — no matter what. Thank you to our community and to all of our readers who are working to aid others in this time of crisis, and to all of those who are making personal sacrifices for the good of their communities.

We will get through this together. Updated: July 26, Tech Tested. This article shows you how to configure in minimum settings.

windows 10 can t see mac on network

Log in Facebook Loading Google Loading Civic Loading No account yet? Create an account. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy.

As the COVID situation develops, our hearts ache as we think about all the people around the world that are affected by the pandemic Read morebut we are also encouraged by the stories of our readers finding help through our site.

Windows 10 Can’t See Other Computers on Network

Article Edit. Learn why people trust wikiHow. To create this article, 15 people, some anonymous, worked to edit and improve it over time. The wikiHow Tech Team also followed the article's instructions, and validated that they work.

Learn more Explore this Article Steps. Tips and Warnings. Things You'll Need.

Share Mac files with Windows users

Related Articles. Click on advanced button on right pane, than select wins tab and type the same workgroup name as using in windows. Include your email address to get a message when this question is answered. By using this service, some information may be shared with YouTube. By default Windows Server will try to encrypt everything sent to and from it. With this enabled you will not be able to log in to the share from your Mac.I just had this problem and solved it after spending some time on it.

I initially thought that it was due to the new firmware 2.

Connect to a Windows computer from a Mac

Also, I am not sure when I started having this problem, as I recently updated both my Windows 10 and the EX; I am not sure which one is to blame at this point.

Question on the whole SMB1 vs. SMB2 vs. This 1, 2, 3 is corresponding to the version iterations of SMB, correct? This is just a wild guess.

So the new firmware might not be the one to blame. And I get inconsistent results with Windows Explorer. Not using homegroup. Fully supports opening and using the shared folder tree on the MyCloud via that laptop. Attempts to access its folder tree only get the MyCloud home page. Did anyone find a solution to this. Have you tried following some of the command in this link that show how to enable and disable various SMB versions for Microsoft OS?

Not quite sure what happened but, without doing anything, it suddenly appeared on my network! I can connect by typing the host name or the IP. This share requires the obsolete SMB1 protocol, which is unsafe and could expose your system to attack. Your system requires SMB2 or higher. For more info. This connection has not been restored. Any ideas, including pointing me to other resources or other posts, are much appreciated as this renders the NAS much less effective.

What I learned was that the laptop where things actually work is Windows 10 Home build So, seems things got broken by the new Windows build. I disabled the firewall and the MyCloud showed up in my network devices. When I turned the firewall back on, the device stayed in the network group. Support Downloads Knowledge Base.

German Spanish Italian French. HGST Support. My Cloud EX Series. Anyway, below is the post and the resolution I added to the announcement page. Hope it helps!You may be connected to your network, but accessing other PCs and devices on your network might be blocked.

This is often due to incorrect settings on your device or a broken network connection. Windows, macOS, and Linux PCs all suffer from this problem from time to time, but here are some quick fixes you can use to resolve the problem. For most Windows users, the biggest cause of hidden PCs on a network is due to the network discovery settings on Windows. When this setting is disabled, your PC is hidden from the local network, and other PCs are hidden from you. Once network discovery has been enabled, you should be able to see other computers in the Networks tab—but only if those devices have network discovery enabled, too.

You can also access devices directly by typing their IP address or hostname in the address bar at the top of the File Explorer window. The Windows Firewall is designed to block unnecessary traffic to and from your PC. One way to check this is to use the ping command from a PowerShell or command line.

This would likely suggest a software or network configuration issue elsewhere. If Windows detects any problems with your network configuration, it will automatically attempt to fix them.

For instance, a feature called wireless isolation sometimes called client isolation or AP isolation on some routers will hide wireless devices from each other on a local network, preventing you from connecting to them from your PC.

Apple devices are usually very good at detecting other Apple devices, thanks to the Apple Bonjour networking service, and it can usually detect other Windows and Linux PCs, too. If you want to see other computers on macOS, you can do this by clicking the Network tab in the core macOS Finder app.

windows 10 can t see mac on network

Once checked, you should be able to see a Connected servers tab in Finder, where your connected PC will be shown for you to access. In the Network settings menu, check your connection type in the left-hand menu—the icon next to your connection should be green. To check if your PC can see other devices, you can use the arp-scan network scanning tool to scan your network for devices instead.

This will list all available devices on your network. A list of available devices on your network will be listed, with IP addresses, MAC addresses, and device types shown. If it fails, it will likely indicate a problem with your overall network configuration or firewall. You can take the usual steps physical checks and connection tests to try to resolve these. If your WiFi connectivity is causing problems, switching to an all-wired network could resolve the problem over the long term.

Ben Stockton is a freelance technology writer based in the United Kingdom. In a past life, Ben was a college lecturer in the UK, training teens and adults.

Since leaving the classroom, Ben has taken his teaching experience and applied it to writing tech how-to guides and tutorials, specialising in Linux, Windows, and Android. He has a degree in History and a postgraduate qualification in Computing. Read Ben's Full Bio.

Subscribe to Help Desk Geek and get great guides, tips and tricks on a daily basis! We only send useful stuff! We hate spam too, unsubscribe at any time. Want to impress your friends and family with awesome tech geekery?Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Learn More. Learn how to collaborate with Office Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services.

You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number. I have had an issue trying to connect to my mac-mini with my updated from Win7 Win10 machine now. Now after upgrading to Win 10 I cannot see the mac-mini on the network. What happened in the upgrade?? I understood all programs and access to be the same after update from 7 to 10??

Sorry to know that you are unable to connect Mac-mini on Windows I will certainly help you. This issue might occur if the device settings are incorrect, corrupted or incompatible drivers or due to hardware problems. I suggest you to follow the troubleshooting methods listed below and check if it resolves the issue. If you can't connect to a network, there might be a problem with your network adapter, the piece of hardware that makes it possible for your PC to connect to a network. First, try using the Network Adapter troubleshooter to automatically find and fix some problems.

This troubleshooter will disable and re-enable the adapter and try some other common repairs. Here's how:. Open Control Panel by right click on Start Button.

windows 10 can t see mac on network

In the search box, type troubleshooterand then click Troubleshooting. Click Network and Internet, and run the Network Adapter troubleshooter, and follow the instructions on your.

Windows 10 Can’t See Other Computers on Network

I recommend you to check whether the Network discovery is enabled in Network and Sharing. Click on Network and Sharing center and select Change advanced sharing settings on left panel. Select the option Turn on network discovery and check the option Turn on automatic setup of network.

Select the option Turn on file and printer sharing under File and printer sharing. Click on Save changes and check if the issue is resolved, if not restart the system. Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help. Did this solve your problem? Yes No. Sorry this didn't help. I had already tried the troubleshooting steps before and tried again with no luck. I attribute it to the upgrade. Something was changed detrimental for my Mac access.

AND access by my Mac to my windows 7 machine through Teamviewer. April 7, Keep in touch and stay productive with Teams and Officeeven when you're working remotely.

thoughts on “Windows 10 can t see mac on network

Leave a Reply

Your email address will not be published. Required fields are marked *